High Pass Filters
High pass filters are typically used in transmitter harmonics measurements. This is done by selecting the corner frequency higher than transmitter nominal frequency but below the second harmonic frequency. By this you are able to measure the real power level of transmitted harmonics from the transmitter, without generating more harmonic responses in the Front-End of the measurement equipment.
The datasheets are being updated all the time. If you don´t find the information you need, please don´t hesitate to contact our sales department!
| Product Code | Pass Band | Rejection Band | Rejection min | I.L. max | VSWR | RoHS | Datasheet | |||
|---|---|---|---|---|---|---|---|---|---|---|
| MHz | MHz | dB | Yes/No | |||||||
| CW-HPF-1500-15000-E1-M2 | 1500-15000 | 0-960 | 40 | 1.5 | 1.9 | Yes |  |
|||
| CW-HPF-1800-6000-E1-M2 | 1800-6000 | 865-1000 | 60 | 1.5 | 1.9 | Yes | |
|||
| CW-HPF-1800-6000-E1-M3 | 1800-6000 | 0-1000 | 70 | 1.5 | 1.9 | Yes | N/A |
|||
| CW-HPF-3000-12750-E1-M2 | 3000-12750 | 400-2700 | 60 | 4 | 1.9 | Yes | |
|||
| CW-HPF-3000-12750-E3-M2 | 3000-12750 | 0-2700 | 60 | 3 | 1.9 | Yes | N/A |
|||
| CW-HPF-3000-15000-E1-M2 | 3000-15000 | 0-2500 | 50 | 3 | 1.9 | Yes | N/A | |||
| CW-HPF-4000-6000-E1-M2 | 4000-6000 | 800-3600 | 70 |
4 | 1.9 | Yes | N/A |
|||
| CW-HPF-4000-6000-E3-M2 | 4000-6000 | 0-3600 | 60 | 3 | 1.9 | Yes | N/A |
|||
| CW-HPF-4000-13000-E3-M2 | 4000-13000 | 0-3600 | 60 |
3 | 1.9 | Yes | N/A |
|||
| CW-HPF-5000-6000-E1-M2 | 5000-6000 | 380-3800 | 70 | 4 | 1.9 | Yes | N/A | |||
Products
